Premapped Registers; Active Parameter Setting Group Read And Write; Control Structure 1; Control Structure 2 - ABB RELION 611 Series Modbus Point List Manual

Section 2
Modbus data mappings
2.4.1
2.4.1.1
Table 43: Active parameter setting group - read and write
RegA Type Scale
2301 u16 1
2.4.1.2
Table 44:

Control structure 1

RegA Type Scale
8001
8002
8003
8004
8005
2.4.1.3
Table 45:

Control structure 2

RegA Type Scale
8006
8007
8008
8009
8010
28
Column name Description
IEC 61850 Original IED data object identification. Described in the IEC 61850 format as Logical
name Device.Logical Node and thereafter .Data Object.Data Attribute. Logical Node is the
same as the application function block name.
SA name The signal may have a defined label that is visible, for example, in the Application
Configuration tool in PCM600.
Description Short description of the signal. See the technical manual for more information. Also,
if a register is writable, it is stated here.
Values The value range of the original IEC 61850 value, that is, before scaling.

Premapped registers

Active parameter setting group read and write

IEC 61850 name
LD0.LLN0
ActSetGr.Oper.ctlVal
Control structure 1
IEC 61850 name
Control structure 2
IEC 61850 name
SA name Description
Active setting group
SA name Description
Execute register
Password reg 1
Password reg 2
Control register
Confirm register
SA name Description
Execute register
Password reg 1
Password reg 2
Control register
Confirm register
1MRS757464 C
Values
1...6
Values
1
acc to setting
acc to setting
< single bit >
< single bit >
Values
1
acc to setting
acc to setting
< single bit >
< single bit >
REM611
Point List Manual