Procedure For Functional Check Of Replacement Components - ADC AD-115ES Installation Manual
Adc compact dryer installation manual
Hide thumbs
Also See for AD-115ES:
- Installation & operator's manual (16 pages) ,
- Installation manual (58 pages)
Table of Contents
Advertisement
PROCEDURE FOR FUNCTIONAL CHECK
OF REPLACEMENT COMPONENTS
1. Phase 7 Microprocessor Controller (Computer) Models
a. Upon completing installation of the replacement microprocessor controller (computer) board, reestablish
power to the dryer.
b. Start the drying cycle by pressing any of the preset cycles in letters A-F.
c. Verify that the applicable indicator lights on the microprocessor controller (computer) board are lit.
(Refer to the illustration below.)
42
SECTION VIII
American Dryer Corp.
113202 - 10
Advertisement
Table of Contents
