ADC AD-115ES Installation Manual page 15

4. Exhaust Transition Piece
An exhaust duct transition piece is shipped inside of the dryer's
tumbler and MUST be installed on the dryer's
exhaust duct, with the hardware provided, BEFORE
location venting is connected to the dryer.
THIS EXHAUST DUCT TRANSITION PIECE
Failure to observe this installation requirement may result in
damage to the dryer, create a FIRE HAZARD and will VOID
the manufacturer's warranty.
012999JEV-GS/cj
Inside the basket (tumbler) of this dryer is an
exhaust transition piece that must be installed on
the outlet of the exhaust before any further venting
is connected:
a. Remove the exhaust transition piece from the
basket (tumbler) and place it on the exhaust
outlet.
b. Using the screws provided, secure the exhaust
transition piece to the dryer.
NOTE: It is recommended that this joint be taped
as well as ALL other duct joints to prevent
moisture and lint from escaping into the
building.
113202 - 10
WARNING
MUST BE INSTALLED FIRST!
www.amdry.com
P/N: 114092
11