Table of Contents
Advertisement
Customizing the Controller's BIOS
24 Installing and Configuring the Hardware
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
2. Use the
Tab
the time.
3. Type in the current local time values in each field.
4. Use the Down cursor key to highlight the
5. Use the
Tab
date.
6. Type in the current local date values in each field.
7. Once the time and date are correct, you may change other BIOS
settings (see the following section, "Customizing the Controller's
BIOS") or simply accept the new clock values.
8. To accept the new clock values, use the right and left cursor keys to
change to the Exit Menu, highlight the
and press the
Note
If you have changed or added to the VXI Pentium Controller's hardware in
any way or the default BIOS settings for your controller are not acceptable,
you will need to customize your controller's BIOS.
There may be BIOS customization steps that you still need to complete,
depending on your controller's particular hardware configuration. If either
of the conditions listed below apply to your configuration, you must access
the BIOS Setup Utility during the system boot process.
1. If you installed any other EXMbus interface card(s) in the controller
(other than the HP-22 GPIB card pre-installed in Slot 1.)
2. If any default configuration value in the system BIOS is not suitable
for your controller's particular hardware setup.
To access the BIOS Setup Utility, you must press the
the system boot process once power has been applied to the controller. Then
go to Chapter 3, "Using the BIOS Setup Utility," to set the appropriate BIOS
configuration values for your system.
key to position to the hour, minute, or second fields of
key to position to the month, day, or year fields of the
key. Press the
Enter
Enter
field.
System Date
line,
Save Changes & Exit
again to continue booting.
F2
function key during
Chapter 2
Advertisement
Table of Contents
