Exit Menu; Figure 3-12. Exit Menu - HP VXI Pentium Series Hardware Installation And Configuration Manual

Exit Menu

Save Changes & Exit
Exit Without Saving
Changes
Get Default Values
Load Previous Values
Save Changes
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The fields in this menu allow you to save value settings and exit BIOS Setup,
or abandon value changes and exit. The Exit Menu is shown below.
PhoenixBIOS Setup - Copyright 1985-95 Phoenix Technologies Ltd.
Main Advanced Power
Save Changes & Exit
Exit Without Saving Changes
Get Default Values
Load Previous Values
Save Changes
↑ ↓ Select Item
F1 Help
← → Select Menu
ESC Exit

Figure 3-12. Exit Menu

This field is used to save into CMOS the values that have been entered. The
system then immediately reboots with the new values.
This field is used to discard the changes just made and revert to the state
when BIOS Setup was first entered. The system reboots with the old values.
This field is used to reset the BIOS Setup values to the original, default
values that were set at the factory, before any suppliers or other end-users
made changes. This is useful if you are having problems with the system and
suspect changes made to the BIOS are the cause.
This field is used to load the system with the previous values before an
editing session started. This is useful if you lose track of edits and want to
revert to the previous editing session, but not all the way back to the defaults.
This field is used to save the edits made during a session. You do not exit,
and you can continue to make changes.
EXM Exit
Item Specific Help
<Tab>, <Shift-Tab>, or
<Enter> selects field.
-/+ Change Values F9
Enter Execute Command F10 Previous Values
Using the BIOS Setup Utility
Setup Defaults
43