Power Management Menu; Figure 3-10. Power Management Menu - HP VXI Pentium Series Hardware Installation And Configuration Manual

Power Management Menu

Power Savings:
Standby Timeout:
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
This menu provides control over the power management facilities. As
shown below, only about one-half of the Power Management Menu fields
are visible at any one time; however, for completeness, all of the menu fields
are listed and explained in this section. Use the
keys to display the other page of fields.
Note that the supported states for system BIOS Power Management are:
Fully On, Standby Mode (partial power reduction), and Suspend Mode
(maximum power reduction). Also note that the Power Management
features are not implemented in the default setups.
PhoenixBIOS Setup - Copyright 1985-95 Phoenix Technologies Ltd.
Main Advanced
APM:
Power Savings:
Standby Timeout:
Suspend Timeout:
Standby CPU Speed:
Fixed DIsk Timeout:
CRT:
Standby Timer Reset Events
Keyboard:
Mouse:
Standby Break Events
IRQ0:
IRQ1:
IRQ3:
F1 Help
ESC Exit
APM:
This field enables or disables Advanced Power Management (APM). The
default is Disabled.
This field enables and selects the kind of power management, or it disables
power management. The possible values are:
Disabled (default)
Customize
Maximum
Medium
Minimum
This field enables and sets the inactivity duration required to elapse before
the system is placed into Standby Mode, or it disables the Standby Timeout.
The possible values are:
Disabled (default)
2 minutes
15 minutes
30 minutes
1 hour
2 hours
Power EXM Exit
[Disabled]
[Disabled]
Disabled
DIsabled
MAX
Disabled
ON
[Enabled]
[PS/2 (IRQ12)]
[Disabled]
[Auto]
[Auto]
↑ ↓ Select Item
-/+ Change Values
← → Select Menu
Enter Select > Sub-Menu F10 Previous Values

Figure 3-10. Power Management Menu

Using the BIOS Setup Utility
and
Page Up Page Down
Item Specific Help
<Tab>, <Shift-Tab>, or
<Enter> selects field.
V
F9 Setup Defaults
39