Parallel Port Connector (Cn8) - Aaeon PCM-5335 Manual

P C / 1 0 4 M o d u l e

2.18 Parallel Port Connector (CN8)

Normally, the parallel port is used to connect the board to a printer.
The PCM-5335 includes a multi-mode (ECP/EPP/SPP) parallel port.
It is accessed via CN8, a 26-pin flat-cable connector.
You will need an adapter cable if you use a traditional DB-25
connector. The adapter cable should have a 26-pin connector on one
end and a DB-25 connector on the other.
Pin Signal
1 #STROBE
3 PTD0
5 PTD1
7 PTD2
9 PTD3
11 PTD4
13 PTD5
15 PTD6
17 PTD7
19 #ACK
21 BUSY
23 PE
25 SELECT
Chapter 2 Quick Installation Guide
P C M - 5 3 3 5
Pin Signal
2 #AFD
4 #ERROR
6 #INIT
8 #SLIN
10 GND
12 GND
14 GND
16 GND
18 GND
20 GND
22 GND
24 GND
26 NC
2 - 19