Table of Contents
Advertisement
P C / 1 0 4 M o d u l e
2.1 Safety Precautions
Chapter 2 Quick Installation Guide
Always completely disconnect the power cord from
your board whenever you are working on it. Do not
make connections while the power is on, because
sensitive electronic components can be damaged by
a sudden rush of power.
Always ground yourself to remove any static charge
before touching the board. Modern electronic
devices are very sensitive to static electric charges.
Use a grounding wrist strap at all times. Place all
electronic components on a static-dissipative surface
or in a static-shielded bag when they are not in the
chassis
P C M - 5 3 3 5
2 - 2
Advertisement
Table of Contents
