1. Manuals
  2. Brands
  3. Aaeon Manuals
  4. Control Unit
  5. GENE-8315
  6. User manual

Aaeon GENE-8315 User Manual

Subcompact board onboard intel ulv celeron m 600mhz/1.0ghz zc or celeron m 1.3ghz/1.5ghz processor subcompact board with 18/24-bit dual-channel lvds ac97 2ch audio
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
S u b C o m p a c t B o a r d
G E N E - 8 3 1 5
GENE-8315
®
®
Onboard Intel
ULV Celeron
M
600MHz/1.0GHz ZC or
®
Celeron
M 1.3GHz/1.5GHz
Processor
SubCompact Board
With 18/24-bit Dual-channel LVDS
AC97 2CH Audio
GENE-8315 Manual Rev. A 3rd Ed.
February 2009

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GENE-8315 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Aaeon GENE-8315

Summary of Contents for Aaeon GENE-8315

  • Page 1 G E N E - 8 3 1 5 GENE-8315 ® ® Onboard Intel ULV Celeron 600MHz/1.0GHz ZC or ® Celeron M 1.3GHz/1.5GHz Processor SubCompact Board With 18/24-bit Dual-channel LVDS AC97 2CH Audio GENE-8315 Manual Rev. A 3rd Ed. February 2009...
  • Page 2 AAEON assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein. AAEON reserves the right to make changes in the product design without notice to its users.
  • Page 3 S u b C o m p a c t B o a r d G E N E - 8 3 1 5 Acknowledgments All other products’ name or trademarks are properties of their respective owners. Award is a trademark of Award Software International, Inc. CompactFlash™...
  • Page 4 G E N E - 8 3 1 5 Packing List Before you begin installing your card, please make sure that the following materials have been shipped: • 1 GENE-8315 CPU Card with thermal solution • 1 IDE Cable • 1 KB/Mouse Cable •...

  • Page 5: Table Of Contents

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 Contents Chapter 1 General Information 1.1 Introduction ..............1-2 1.2 Features ................ 1-3 1.3 Specifications ..............1-4 Chapter 2 Quick Installation Guide 2.1 Safety Precautions ............
  • Page 6 S u b C o m p a c t B o a r d G E N E - 8 3 1 5 2.18 Front Panel (CN7) ............. 2-15 2.19 Parallel Port Connector (CN8) ........2-15 2.20 LVDS Connector (CN9)..........2-16 2.21 Audio In/Out/CD-in and MIC Connector (CN10)..
  • Page 7 S u b C o m p a c t B o a r d G E N E - 8 3 1 5 Appendix B I/O Information B.1 I/O Address Map............B-2 B.2 1 MB Memory Address Map ........B-2 B.3 IRQ Mapping Chart............

  • Page 8: Chapter 1 General Information

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 Chapter General Information 1 - 1 Chapter 1 General Information...

  • Page 9: Introduction

    AAEON SubCompact Board –GENE-8315. The most significant feature of GENE-8315 is the LAN port deployment. It accommodates three 10/100Base-TX RJ-45 connectors that allow more and faster network connections.

  • Page 10: Features

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 1.2 Features ® ® Onboard Intel ULV Celeron M 600MHz/ 1.0GHz ZC or ® Celeron M 1.3GHz (Optional)/ 1.5GHz Processor Up to 24-bit Dual-Channel LVDS LCD CRT &...

  • Page 11: Specifications

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 1.3 Specifications System ® ® Onboard Intel ULV Celeron 600MHz/ 1.0GHz ZC or ® Celeron M 1.3GHz (Optional)/ 1.5GHz Memory 200-pin DDR SODIMM x 1,...
  • Page 12 S u b C o m p a c t B o a r d G E N E - 8 3 1 5 input ® ® Power Consumption Intel Celeron M 1.5GHz, DDR (Typical) 1GB; 5.21A @ +5V Board Size 5.75”(L) x 4”...
  • Page 13 S u b C o m p a c t B o a r d G E N E - 8 3 1 5 Storage PATA-33 x 1 (supports two ATAPI devices), Type II CompactFlash x 1 Serial Port RS-232 x 1, RS-232/422/485 x 1 (RS-485 w/auto flow) Parallel Port Supports SPP/EPP/ECP mode...
  • Page 14 S u b C o m p a c t B o a r d G E N E - 8 3 1 5 Chapter Quick Installation Guide Notice: The Quick Installation Guide is derived from Chapter 2 of user manual. For other chapters further installation...

  • Page 15: Safety Precautions

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it.

  • Page 16: Location Of Connectors And Jumpers

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 2.2 Location of Connectors and Jumpers Component Side CN11 CN19 CN18 CN17 CN14 CN13 CN12 CN15 BAT1 2 - 3 Chapter 2 Quick Installation Guide...
  • Page 17 S u b C o m p a c t B o a r d G E N E - 8 3 1 5 Solder Side SO-DIMM 2 - 4 Chapter 2 Quick Installation Guide...

  • Page 18: Mechanical Drawing

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 2.3 Mechanical Drawing Component Side (12.55) (1.60) 133.93 137.16 133.93 132.72 114.94 114.30 109.22 (12.90) 87.63 77.34 (13.35) 72.39...
  • Page 19 S u b C o m p a c t B o a r d G E N E - 8 3 1 5 Solder Side 120.65 55.53 15.37 0.00 2 - 6 Chapter 2 Quick Installation Guide...

  • Page 20: List Of Jumpers

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 2.4 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application.

  • Page 21: List Of Connectors

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 2.5 List of Connectors The board has a number of connectors that allow you to configure your system to suit your application.
  • Page 22 S u b C o m p a c t B o a r d G E N E - 8 3 1 5 CN18 Mini-Din PS/2 Connector CN19 CRT Display Connector BAT1 External Battery CFD1 Compact Flash Disk Slot 2 - 9 Chapter 2 Quick Installation Guide...

  • Page 23: Setting Jumpers

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 2.6 Setting Jumpers You configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.

  • Page 24: Clear Cmos (Jp1)

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 2.7 Clear CMOS (JP1) Function Normal (Default) Clear CMOS 2.8 COM2 RI/+5V Selection (JP2) Function RI (Default) 2.9 LVDS Inverter Voltage Selection (JP3) Function +5V (Default)

  • Page 25: Internal Usb2.0 Ports (Cn1)

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 2.12 Internal USB 2.0 Ports (CN1) Signal Signal +5 Volt. Ground Data2 - Ground Data2 + Data3 + Ground Data3 -...

  • Page 26: Serial Port 1 Connector (Cn3)

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 CS#1 CS#3 ACT# Ground +5 Volt. +5 Volt. Ground 2.14 Serial Port 1 Connector (CN3) COM1 Signal Signal DCDA...

  • Page 27: Digital I/O Connector (Cn5)

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 N/C / +5 Volt. COM2/ RS-485 Signal Signal TXD- TXD+ Ground N/C / +5 Volt. 2.16 Digital I/O Connector (CN5) Signal Signal Port 1...

  • Page 28: Lvds Inverter Connector (Cn6)

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 Port 8 CN5 Pin 8 Bit 0 U40 Pin 27 (GPIO 20) 2.17 LVDS Inverter Connector (CN6) Signal +5 Volt.

  • Page 29: Lvds Connector (Cn9)

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 PTD7 Ground ACK# Ground BUSY Ground Ground SLCT 2.20 LVDS Connector (CN9) Signal Signal Back-Light Enable LCD Volt.

  • Page 30: Power Connector (Cn11)

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 LINE_IN L CD_L LINE_IN R CD_GND Ground CD_R LINE_OUT L LINE_OUT R Ground Ground 2.22 4P Power Connector (CN11) Signal +12 Volt.

  • Page 31: Ethernet #1 10/100Base-Tx Rj-45 Phone Jack (Cn14)

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 TXD- TXD+ ACT_LED LINK_LED +3.3 Volt. SPD_LED Ground Ground 2.25 Ethernet #1 10/100Base-TX RJ-45 Phone Jack (CN14) Ethernet RJ-45 Connector/ Realtek RTL8100BL Signal Signal...

  • Page 32: Fan Connector (Cn17)

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 2.27 FAN Connector (CN17) Signal FAN Sense +5 Volt. / +12 Volt. (Optional) Ground 2.28 Mini-DIN PS/2 Connector (CN18) Signal Signal Keyboard Data...
  • Page 33 S u b C o m p a c t B o a r d G E N E - 8 3 1 5 Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Main Board/ Daughter Board/ Backplane 有毒有害物质或元素 部件名称 铅...

  • Page 34: Chapter 3 Award Bios Setup

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 Chapter Award BIOS Setup Chapter 3 Award BIOS Setup...

  • Page 35: System Test And Initialization

    3. The CMOS memory has lost power and the configuration information has been erased. The GENE-8315 CMOS memory has an integral lithium battery backup for data retention. However, you will need to replace the complete unit when it finally runs down.

  • Page 36: Award Bios Setup

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 3.2 Award BIOS Setup Awards BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off.
  • Page 37 Save CMOS value changes to CMOS and exit setup. Exit Without Saving Abandon all CMOS value changes and exit setup. You can refer to the "AAEON BIOS Item Description.pdf" file in the CD for the meaning of each setting in this chapter. Chapter 3 Award BIOS Setup...

  • Page 38: Chapter 4 Driver Installation

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 Chapter Driver Installation 4 - 1 Chapter 4 Driver Installation...
  • Page 39 For installation procedures of each driver, you may see the details in the following. Note: ® GENE-8315 adopts two different LAN controllers-Intel EP82562ET and Realtek RTL8100BL-LF. Therefore, please install both the LAN drivers of Step 3 and Step 4 to ensure the three LAN ports can work properly.
  • Page 40 S u b C o m p a c t B o a r d G E N E - 8 3 1 5 4.1 Installation Insert the GENE-8315 CD-ROM into the CD-ROM drive and install the drivers from Step 1 to Step 5 in order. ®...
  • Page 41 S u b C o m p a c t B o a r d G E N E - 8 3 1 5 Step 4 – Install Realtek LAN Driver 1. Click on the Step 4 –Realtek LAN Driver folder and double click on Setup.exe 2.

  • Page 42: Appendix A Programming The Watchdog Timer

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 Appendix Programming the Watchdog Timer Appendix A Programming the Watchdog Timer...

  • Page 43: Programming

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 A.1 Programming GENE-8315 utilizes ITE 8712 chipset as its watchdog timer controller. Below are the procedures to complete its configuration and the AAEON intial watchdog timer program is also attached based on which you can develop customized program to fit your application.
  • Page 44 S u b C o m p a c t B o a r d G E N E - 8 3 1 5 Mode is not exited normally. (1) Enter the MB PnP Mode To enter the MB PnP Mode, four special I/O write operations are to be performed during Wait for Key state.
  • Page 45 S u b C o m p a c t B o a r d G E N E - 8 3 1 5 WatchDog Timer Control Register (Index=71h, Default=00h) WatchDog Timer Configuration Register (Index=72h, Default=00h) WatchDog Timer Time-out Value Register (Index=73h, Default=00h) Appendix A Programming the Watchdog Timer...

  • Page 46: Ite8712 Watchdog Timer Initial Program

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 A.2 ITE8712 Watchdog Timer Initial Program .MODEL SMALL .CODE Main: CALL Enter_Configuration_mode CALL Check_Chip mov cl, 7 call Set_Logic_Device ;time setting mov cl, 10 ;...
  • Page 47 S u b C o m p a c t B o a r d G E N E - 8 3 1 5 ; game port enable mov cl, 9 call Set_Logic_Device Initial_OK: CALL Exit_Configuration_mode MOV AH,4Ch INT 21h Enter_Configuration_Mode PROC NEAR MOV SI,WORD PTR CS:[Offset Cfg_Port] MOV DX,02Eh...
  • Page 48 S u b C o m p a c t B o a r d G E N E - 8 3 1 5 Exit_Configuration_Mode ENDP Check_Chip PROC NEAR MOV AL,20h CALL Read_Configuration_Data CMP AL,87h JNE Not_Initial MOV AL,21h CALL Read_Configuration_Data CMP AL,12h JNE Not_Initial Need_Initial:...
  • Page 49 S u b C o m p a c t B o a r d G E N E - 8 3 1 5 MOV DX,WORD PTR CS:[Cfg_Port+06h] IN AL,DX Read_Configuration_Data ENDP Write_Configuration_Data PROC NEAR MOV DX,WORD PTR CS:[Cfg_Port+04h] OUT DX,AL XCHG AL,AH MOV DX,WORD PTR CS:[Cfg_Port+06h] OUT DX,AL...
  • Page 50 S u b C o m p a c t B o a r d G E N E - 8 3 1 5 Set_Logic_Device proc near push ax push cx xchg al,cl mov cl,07h call Superio_Set_Reg pop cx pop ax Set_Logic_Device endp ;Select 02Eh->Index Port, 02Fh->Data Port Cfg_Port DB 087h,001h,055h,055h...

  • Page 51: Appendix B I/O Information

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 Appendix I/O Information Appendix B I/O Information...

  • Page 52: I/O Address Map

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 B.1 I/O Address Map Address Description User Address 000-01F DMA Controller #1 000-000F 020-03F Interrupt Controller #1, Master 020-021 040-05F System Timer...

  • Page 53: Irq Mapping Chart

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 B.3 IRQ Mapping Chart IRQ0 System Timer IRQ8 System CMOS / Real time clock IRQ1 Keyboard IRQ9 Microsoft ACPI –...

  • Page 54: Appendix C Mating Connector

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 Appendix Mating Connector C - 1 Appendix C Mating Connector...

  • Page 55: List Of Mating Connectors And Cables

    S u b C o m p a c t B o a r d G E N E - 8 3 1 5 C.1 List of Mating Connectors and Cables The table notes mating connectors and available cables. Connector Function Mating Connector Available...
  • Page 56 S u b C o m p a c t B o a r d G E N E - 8 3 1 5 CPU FAN Hobase CN17 2503-H-3 Connector Technology Mini-Din Keyboard Catch MD06F011 PS/2 & Mouse CN18 1700060192 Electronics Connector Cable...

Table of Contents