Configuration And Settings - Protrol IPC4020 Manual

Configuration and Settings

Configuration is done using the web interface. See chapter 4 for details on connection to the device and its
web interface.
All settings can be found on the
Save settings:
•
When new settings are to be saved and activated in the IPC unit, press the Write to unit button.
•
The settings are then transferred to the device and it then restarts automatically.
•
You may need to reconnect and login after the restart.
•
The settings can also be saved to a local file using the Save as.... button.
Read settings:
•
If settings are to be reread from the unit, press the Read from unit button.
•
Settings saved on file are loaded using the Open.... button.
Reset settings:
•
IPC402x is delivered either with Protrol's factory defaults or with specific customer settings
(delivery defaults) according to agreement between Protrol and the customer.
•
Reset to factory / customer settings is made on the
Note that passwords for the different login levels are also reset.
Internet settings, the device's IP address, etc., are not reset.
Protrol AB
Alfagatan 3
431 49 Mölndal, SWEDEN
Config tab:
13
System tab.
Ver 1909
Phone: +46 31 45 82 00
internet: www.protrol.se
e-mail: info@protrol.se