How To Connect Via Wireless Lan - GRAPHTEC GL240 Setup Manual

How to Connect via Wireless LAN
■Wireless LAN settings
Specify the wireless connection settings on [LAN] on the menu of GL240, or specify on [WLAN]
on GL840.
Specify the wireless LAN settings by the following procedure.
Set [Wireless LAN] from [Off ] to [Access point].
For GL240
After setting to [Access point], restart the wireless LAN.
After restarting the wireless LAN, follow the instruction if turning the power on again is
necessary.
Specify the necessary setting items such as SSID.
Specify the AP-IP setting, and refl ect the setting.
Next, specify the printer settings.
For GL840
Specify the IP
address.
Perform [Apply
settings].
E-6