INSTALLATION INSTRUCTIONS VOLT Brass Regal LED Path & Area Light ® VPL-1012-4-BBZ Important: Please Read Before Installation This fixture is intended for installation in accordance with local codes and the National Electric Code (NEC). Failure to adhere to these codes and instructions may result in serious injury, property damage and void the warranty.
Page 3
Package Contents A. Fixture Body B. Stake Parts Required (sold separately) A. LED Bulb Product Dimensions 9” 3” 25.5” customersupport@voltlighting.com • 813.978.3700 - 3 -...
Page 4
INSTALLATION INSTRUCTIONS VOLT Brass Regal LED Path & Area Light ® VPL-1012-4-BBZ Install Stake Determine the desired location for Board mounting the fixture. Hammer the stake into the ground until flange of stake is flush to grade. To avoid damage to the stake, place a board on top of the stake while hammering.
Page 5
Install Bulb Insert the bulb with the correct Bulb wattage and type marked on the fixture label. Socket CAUTION: Do not exceed maximum wattage marked on luminaire label. NOTE: DO NOT touch bulb with bare hands. Use soft cloth to handle bulb. Install Fixture Hat and Inner Shield Push the inner shield onto the fixture Finial...
INSTALLATION INSTRUCTIONS VOLT Brass Regal LED Path & Area Light ® VPL-1012-4-BBZ Wire Connection Pigtail Wire Connectors Main Supply Cable Strip both leads from the luminaire pigtail. Using two wire connectors (sold separaetly), connect the leads from the luminaire to the main supply cable leads.
Need help?
Do you have a question about the VPL-1012-4-BBZ and is the answer not in the manual?
Questions and answers