Page 2
INSTALLATION INSTRUCTIONS VOLT ShadowMaster™ LED Path & Area Light ® VPL-1039 Important: Please Read Before Installation This luminaire is intended for installation in accordance with local codes and the National Electric Code (NEC). Failure to adhere to these codes and instructions may result in serious injury, property damage and void the warranty.
Page 3
Package Contents A. (1) XL Hammer Stake A. (1) Fixture Body B. (1) LED Puck Light (pre-installed) B. (1) Rod Product Dimensions 11” 34.5” customersupport@voltlighting.com • 813.978.3700 - 3 -...
Page 4
INSTALLATION INSTRUCTIONS VOLT ShadowMaster™ LED Path & Area Light ® VPL-1039 Install Stake Determine the desired location for Board mounting the fixture. Hammer the stake into the ground until flange of stake is flush to grade. To avoid damage to the stake, place a board on top of the stake while hammering.
Page 5
Wire Connections Pigtail Grease Filled Wire Connectors Main Supply Cable Strip both leads from the luminaire pigtail. Using two wire connectors (sold seperately), connect the leads from the luminaire to the main supply cable leads. customersupport@voltlighting.com • 813.978.3700 - 5 -...
Need help?
Do you have a question about the ShadowMaster VPL-1039 and is the answer not in the manual?
Questions and answers