Table of Contents
Advertisement
4
Communicating with Other Computers
This section gives procedures for using Terminal
Emulation once the hardware and software have been set
up.
The first part of this section covers placing a
data call, logging into a host computer, working in
terminal mode, and ending a data call.
The second part of this section gives detailed
procedures for performing data transfers while
communicating with a host computer.
These procedures
include recording data displayed on your screen,
sending and receiving files, and printing screen data.
Two sample data transfer sessions are also included.
Placing a Data Call
Follow these general procedures to place a data call:
1
Select the data call entry from the Telephone
Manager Call screen or Directory, and then
press <Enter> to place the call.
2
When you are connected, you should see a
prompt from the host computer.
If you don't
see a prompt, press <Return> and the prompt
should appear.
3
Follow the host computer's login procedure to
gain access to the system.
Refer to the "Setting Up the Software for Data Calls"
chapter in this guide and to the AT&T UNIX PC Telephone
Manager User's Guide for more information on setting up
data calls.
4-1
Advertisement
Table of Contents
