The Operating Modes; The Finishing Modes - Plockmatic SR 85 Operator's Manual

3.1 The operating modes

3.2 The finishing modes

Bookletmaker SR 85 Operator Manual
3. Operating and finishing modes
The SR 85 can be operated in several combinations of
modes. These modes are two operating modes and
two finishing modes. In this section we will explain the
different modes and how they are selected.
The two operating modes are:
1. Manual mode
The manual mode is set on a unit, that should be used as
a "stand alone" unit, and is fed manually.
The Manual mode is set by pressing the Manual / Auto
mode button on the Control panel and is shown by the
Manual mode indicator-LED.
2. Automatic mode
The Automatic mode is set on a unit, that is to operate
together with a collator as an on-line system.
The Automatic mode is set by pressing the Manual / Auto
mode button on the Control panel and is shown by the
Automatic mode indicator-LED.
The two finishing modes are:
1. Fold only
When selecting this mode by pressing the Program
select button, the stapler movement is switched off and
the folded set will exit at the upper output area on to the
belt stacker.
2. Saddle stapling and fold
When selecting this mode by pressing the Program
select button, the stapled and folded sets will exit at the
upper output area on to the belt stacker.
3-1
SR85 Op Man February 2001