Directed XPRESSKIT DBALL Installation Manual

Hide thumbs Also See for XPRESSKIT DBALL:

Installation manual (26 pages)

Manual (19 pages)

Installation manual (11 pages)

page of 18

/ 18
Bookmarks

Quick Links

Download this manual

Platform: DBALL/DBALL2

Firmware: GM6 Remote Start Ready (RSR) Installation v. 2.29+

Update Alert: Firmware updates are posted to the web on a regular basis. We recommend

that you check for firmware and/or install guide updates prior to installing this product.

Installation Guide

Door lock and transponder interface for many late model Cadillac, Hummer, GM, Pontiac, Saturn and

Suzuki vehicles allowing for the vehicle to be remotely started without the need for a remote starter.

This guide supports the installation of a DBALL in Remote Start Ready (RSR) mode. This solution

offers three (3) configuration options to control your system: 3x OEM Lock Remote Start Activation,

RF Kit or SmartStart (all sold separately).

Remote Start Ready (RSR) is a function that enables the interface module to remote start the vehicle

completely on its own. Consequently, there is no need for an aftermarket or an OEM remote starter in order to

start the vehicle from a distance.

Important!

This product is NOT compatible with vehicles equipped with a manual transmission.

Index

Vehicle Application Guide................................................................................................................................................

Installation Type 1 (with RFLCHGM)..............................................................................................................................

Installation Type 2 (without RFLCHGM).........................................................................................................................

Installation Type 3a with T-Harness THGM610 T-01 (without RFLCHGM)....................................................................

Installation Type 3b with T-Harness THGM610 T-01 (without RFLCHGM)....................................................................

Installation Type 3c with T-Harness THGM610 T-02 (without RFLCHGM)....................................................................

Installation Type 3d with T-Harness THGM610 T-02 (without RFLCHGM)....................................................................

SmartStart/XL202 Installation Notes...............................................................................................................................

Vehicle Wiring Reference Chart.......................................................................................................................................

Module Programming......................................................................................................................................................

Module Reset & Hard Reset............................................................................................................................................

Feature & Option List.......................................................................................................................................................

Feature Programming......................................................................................................................................................

LED Diagnostics and Troubleshooting.............................................................................................................................

Limited One-Year Consumer Warranty............................................................................................................................

Quick Reference Guide...................................................................................................................................................

SmartStart Compatible

SmartStart is equipped with D2D, which means it can be connected to an interface module and used in Remote

Start Ready (RSR) mode without the use of a remote starter. See the Module Programming section for more

information.

® Buick, Cadillac, Chevrolet, GMC, Hummer, Pontiac, Saturn and Suzuki are registered trademarks and property of their respective companies.

Rev.: 20150731

Need help?

Do you have a question about the XPRESSKIT DBALL and is the answer not in the manual?

Questions and answers

Summary of Contents for Directed XPRESSKIT DBALL

Page 1 Start Ready (RSR) mode without the use of a remote starter. See the Module Programming section for more information. ® Buick, Cadillac, Chevrolet, GMC, Hummer, Pontiac, Saturn and Suzuki are registered trademarks and property of their respective companies. © 2015 Directed. All rights reserved.
Page 2 [2] The Buick Lucerne, Cadillac CTS and Chevrolet Impala require the trunk feature to be set to Electric Rear Hatch option for the trunk to work. Legend: AV: Horn & Lights Controls CC: Comfort & Convenience Controls DL: OE Door Lock & Alarm Controls RS: Remote Start & Engine Controls SS: Integrated Security & Monitoring ST: Function/Feature Status © 2015 Directed. All rights reserved.
Page 3 (Green/Black, pin 2/12) to the driver door sense trigger (Gray/Black) to avoid this issue. RAP Off: Refer to Vehicle Wiring Reference Chart (page 10) for wire color and location. With the exception of the OBDII Diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise). © 2015 Directed. All rights reserved.
Page 4 (Green/Black, pin 2/12) to the driver door sense trigger (Gray/Black) to avoid this issue. RAP Off: Refer to Vehicle Wiring Reference Chart (page 10) for wire color and location. With the exception of the OBDII Diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise). © 2015 Directed. All rights reserved.
Page 5 If the RAP Off wire is not connected, the radio will turn OFF but some lights will remain ON in the central console for 10 minutes. Connect this wire (Green/Black, pin 2/12) to the driver door sense trigger (Gray/Black) to avoid this issue. RAP Off: Refer to Vehicle Wiring Reference Chart (page 10) for wire color and location. © 2015 Directed. All rights reserved.
Page 6 If the RAP Off wire is not connected, the radio will turn OFF but some lights will remain ON in the central console for 10 minutes. Connect this wire (Green/Black, pin 2/12) to the driver door sense trigger (Gray/Black) to avoid this issue. RAP Off: Refer to Vehicle Wiring Reference Chart (page 10) for wire color and location. © 2015 Directed. All rights reserved.
Page 7 If the RAP Off wire is not connected, the radio will turn OFF but some lights will remain ON in the central console for 10 minutes. Connect this wire (Green/Black, pin 2/12) to the driver door sense trigger (Gray/Black) to avoid this issue. RAP Off: Refer to Vehicle Wiring Reference Chart (page 10) for wire color and location. © 2015 Directed. All rights reserved.
Page 8 If the RAP Off wire is not connected, the radio will turn OFF but some lights will remain ON in the central console for 10 minutes. Connect this wire (Green/Black, pin 2/12) to the driver door sense trigger (Gray/Black) to avoid this issue. RAP Off: Refer to Vehicle Wiring Reference Chart (page 10) for wire color and location. © 2015 Directed. All rights reserved.
Page 9 Refer to the Passive Keyless Entry (PKE) Installation Guide (N2102T) for detailed wiring information. RF Kit, PKE & SmartStart BT Combination Refer to the Passive Keyless Entry (PKE) Installation Guide (N2102T) for detailed wiring information. © 2015 Directed. All rights reserved.
Page 10 Please note that pin numbers may vary from vehicle to vehicle. * For vehicles not equipped with "Express window up/down” feature, hook up the Green/Black (pin 2 of 12-pin connector on DBALL) to the driver door trigger wire of the vehicle. © 2015 Directed. All rights reserved.
Page 11 Turn the key to the ignition position. The LED Key IN Solid x3 Secs & & turns ON green for 3 seconds or flashes green Flashes x2 START 2 times then shuts off. Key OUT Remove the key from ignition. START © 2015 Directed. All rights reserved.
Page 12 Wait 3 seconds until the LED turns ON solid orange, and wait 10 more seconds & until the LED starts to flash orange and red. Solid Flashes & Release the programming button. The LED turns ON solid red. Release Solid © 2015 Directed. All rights reserved.
Page 14 No activity for 30 seconds; after 30 seconds, the LED will turn ON orange for 2 seconds to confirm the end of the programming sequence. Press and HOLD the programming button for 3 seconds. After 3 seconds, the LED will turn ON orange for 2 seconds to confirm the end of the programming sequence. © 2015 Directed. All rights reserved.
Page 15 If the bypass module fails to flash, it means the module did not receive the signal. TRUNK command received. Flashes orange Commands can come from RF, D2D. Flashes orange AUX1 command received. Flashes orange AUX2 command received. © 2015 Directed. All rights reserved.
Page 16 Part was purchased from an authorized DIRECTED dealer; and the Part is returned to DIRECTED, postage prepaid, along with a clear, legible copy of the receipt or bill of sale bearing the following information: consumer’s name, address, telephone number, the authorized licensed dealer’s name and complete...
Page 17 3 times, then to activate x3 + the panic mode. Press once, then to reset the x1 + remote starter runtime. * This output is configurable. see your authorized installation center for more information. © 2015 Directed. All rights reserved.
Page 18 3.0 enables a "Cloud-Connected Car" like never before, providing an entirely new level of 2-way interaction with your vehicle. Connectivity is managed through the Directed Cloud Services (DCS) network linking car, app, end user, and the Internet. For more information, visit www.mysmartstart.com.

This manual is also suitable for:

Xpresskit dball2