Seat ALHAMBRA Owner's Manual page 69

Menu Function
When the ignition is switched on, the average con-
Average fuel con-
sumption (in l/100 km or in mpg) is displayed after
sumption
the vehicle has moved approximately 100 metres
(328 feet). Otherwise horizontal lines are displayed.
The value shown is updated approximately every 5
seconds.
Approximate distance in km (or miles) that can still
Fuel range
be travelled with the fuel remaining in the tank, as-
suming the same style of driving is maintained. This
is calculated using the current fuel consumption.
Distance covered Distance travelled, after ignition is switched on, in
km (or miles).
Average speed After the ignition is switched on, the average speed
will be shown after a distance of approximately 100
metres (328 feet) has been travelled. Otherwise hori-
zontal lines are displayed. The value shown is upda-
ted approximately every 5 seconds.
Current speed displayed digitally.
Digital display of
speed
Oil temperature digi- Updated engine oil temperature digital display
tal display
If the stored speed is exceeded (between 30 -
Speed warning to ---
250 km/h, or 18 - 155 mph), an audible warning is
km/h
given together with a visual warning.
Changing between display modes
● In vehicles without multifunction steering wheel: press the lever.
● Vehicles with a multifunction steering wheel: press
Storing a speed for the speed warning
● Select the display Speed warning at --- km/h
● Press to store the current speed and switch off the warning.
OK
Safety First
or .
 
.
Operating instructions
● In addition, set the required speed by pressing the rocker switch on the
windscreen wiper lever or buttons or

wheel for 5 seconds. Next, press again or wait a few seconds. The
OK
speed is stored and the warning activated.
● To switch off, press . The stored speed is deleted.
OK
Manually erasing memory 1 or 2
● Select the memory to be erased.
● Press and hold for approximately two seconds.
OK
Personalising the displays
It is possible to select which of the displays in the multifunction display you
wish to see on the instrument panel in the
measurement can also be modified ⇒ p age 67.
Menu
Configuration
Configuration
Function
Menu
Configuration of the multifunction display data that you
Multifunction
wish to see on the instrument panel display ⇒ p age 66.
display data
Compass Changing the magnetic region and calibration of the com-
pass. To calibrate the compass, please follow the instruc-
tions given on the instrument panel display.
Changing vehicle convenience functions ⇒ p age 68.
Convenience
Lights & visi-
Configuration of vehicle lighting ⇒ p age 69.
bility
Changing the hours and minutes of the instrument panel
Time
clock and the navigation system. The time can be set here
and the choice can be made between the 24 hour and 12
hour display. The S in the upper part of the display indi-
cates that the clock is set to summer time.
Practical tips
Cockpit
on the multifunction steering

settings menu. The units of


Technical Specifications
67