Seat ALHAMBRA Owner's Manual page 310

308 Wheels and tyres
Full hubcaps*
Removing the full hubcap
● Take the wheel brace and the wire hook from the vehicle tool kit
⇒ p age 323.
● Hook the wire through one of the grooves on the hubcap.
● Insert the wheel brace onto the wire hook
cap in the direction shown by the arrow.
Fitting hubcaps
Before mounting the full hubcap, the anti-theft wheel lock must be threaded
⇒ F ig. 184
into position or
2
the full hubcap.
Press the hubcap against the wheel so that the space for the valve fits over
⇒ F ig. 184
the tyre valve . Make sure that the hubcap is correctly fitted all
1
the way around the wheel.
Fig. 181 Removing the
full hubcap
⇒ F ig. 181
and pull the hub
. Otherwise it will not be possible to mount
3
Wheel bolt caps
● Take the wire hook from the vehicle tool kit ⇒ p age 323.
● Insert the wire hook in the cap through the opening
outwards in the direction of the arrow.
The caps protect the wheel bolts and should be remounted after changing
the tyre.
The anti-theft wheel locking bolt has a special cap. This cap only fits on an-
ti-theft locking bolts and is not for use with standard wheel bolts.

Fig. 182 Removing the
wheel bolt caps
⇒ F ig. 182
and pull
