Seat ALHAMBRA Owner's Manual page 340

338 If and when
Changing the number plate light
1.
Press the flat part of the screwdriver included in the vehicle on-board
2. tools (⇒ F ig. 200) in the direction of the arrow, in the groove of the
number plate light
3.
Press on the connector lock in the direction of the arrow
4.
and pull out the connector.
Rotate the lamp holder in the direction of the arrow
5.
with the lamp.
6.
Insert the lamp holder into the number plate light and rotate all the
7.
way in the opposite direction to the arrow
8. Plug the connector into the lamp holder.
Fig. 215 On the rear
bumper: number plate
lights
Fixed number plate light
Always take the checklist into account and take the necessary actions ⇒ p age 330.
⇒ F ig.
215.
Detach the number plate light.
⇒ F ig. 216
and extract it
B
Replace the faulty bulb by a new identical bulb.
.
B
Complete operations only in the sequence given:
Bolted number plate light
Unscrew the number plate light screws using the screwdriver from the
vehicle tool kit (⇒ F ig. 200).
Separate the attachment tabs from the rear panel of the number plate
A
light by pressing.
Take the lamp holder out of the number plate light.
Insert the lamp holder into the number plate light.
Press on the attachment tabs. The lamp holder must be firmly attached
to the number plate light.
Fig. 216 Number plate
light: Remove the lamp
holder
