Seat ALHAMBRA Owner's Manual page 203

Optical parking system* (OPS)
The optical parking system is an accessory to the Parking sensor system
⇒ p age 200 and the park assist system ⇒ p age 203.
Safety First
Fig. 143 On-screen OPS
display: an obstacle
A
has been detected in the
collision zone. an ob-
B
stacle has been detected
in the segment zone
C
recorded behind the vehi-
cle
Fig. 144 On-screen OPS
display: an obstacle
A
has been detected in the
segment zone recor-
B
ded behind the vehicle
Operating instructions
The zone recorded by the sensors in front of and behind the vehicle is dis-
played on the factory-fitted radio or navigation system screen. Any obsta-
cles are display in relation to the vehicle ⇒
Function Necessary operations
Switch on the parking sensor system ⇒ p age 200
Switching the display
or the park assist system ⇒ p age 203. The OPS
on:
switches on automatically.
Press a zone selection button on the factory-fit-
Switching the display ted radio or navigation system
off manually: OR: Briefly press the function button
on the screen.
Drive forwards at more than about 10-15 km/h (6
to 10 mph).
Switching the display
Select the reverse gear on vehicles with rear as-
off manually:
sist ⇒ p age 208. The display changes to the im-
age of the camera.
Zones explored
The zone in which obstacles are recognised runs to a distance of around
120 cm from the front of the vehicle and up to 60 cm to the side
⇒ F ig. 144
. Behind the vehicle, the zone analysed reaches a distance of
B
up to 160 cm and around 60 cm to the sides
Screen display
The image displayed represents the supervised zones in several segments.
As the vehicle moves closer to an obstacle, the segment moves closer to the
⇒ F ig. 144
vehicle displayed and
B A
displayed, this means that the vehicle has reached the collision zone. Stop
the vehicle!
Practical tips
Driving
.
or
RVC

⇒ F ig. 143
.
C
. When the penultimate segment is

Technical Specifications
201