Seat ALHAMBRA Owner's Manual page 206

204 Driving
● To ensure that the system works properly, the bumper sensors must be
kept clean, free of ice and snow and uncovered.
● The bumper sensors may become damaged or misaligned, for example,
when parking.
● When cleaning the sensors with high-pressure or steam cleaning equip-
ment, spray the sensors briefly at a distance of no less than 10 cm.
Note
Contact a specialised workshop with any system faults. SEAT recommends
visiting a Technical Service.
Parking using the park assist system

Fig. 146 Gap detected: Engage the reverse gear to park (parallel or nose/tail to the
kerb)
Preparing to park
● The Traction control system ASR must be turned on ⇒ p age 184.
● Parallel parking: press the button
once. When the function is enabled, the button
● Perpendicular parking: press the button
(30 mph) twice. When the function is enabled, the button
Fig. 145 Detailed view of
light up.
the centre console: but-
● If necessary, press the
ton to switch the park as-
sist system on manually
● Apply the turn signal for the side on which a gap is to be detected for
parking. The instrument panel displays the side corresponding to the road.
at speeds up to 50 km/h (30 mph)

⇒ F ig. 145
will light up.
at speeds up to 50 km/h

⇒ F ig. 145
button once more to change parking mode.

will
