Seat ALHAMBRA Owner's Manual page 334

332 If and when
Fig. 205,
Turn signals (small lamp
Fig. 206
3.
Rotate the lamp holder
to the left all the way
1
4.
and pull it out back-
wards with the bulb.
5.
6.
7. Place the bulb holder in the headlight and rotate to the right all the way.
8.
Note
The images show the left hand headlight from behind. The structure of the
right hand side headlight is symmetric.
A
Dipped beam head-
holder) lights
Rotate the lamp holder to the left all the way and
pull it out backwards with the bulb.
Depending on the model, the bulb is removed directly from the lamp holder or it may need to be rotated and then removed.
Replace the faulty bulb by a new identical bulb.
B
Daytime driving light Main beam headlights
Remove the rubber cover on the rear of the headlight.
Press the wire clip down-
wards and pull the lamp
holder
2
bulb.
Place the lamp holder in
the headlight and pull the
wire clip upwards until it
clicks into place.
Insert the rubber cover.

C
Side lights
Pull the lamp holder
3
out backwards with the
out with the
bulb.
Place the lamp holder in
the headlight and insert
completely.