Seat ALHAMBRA Owner's Manual page 337

To replace the rear lid light bulbs
Safety First
Fig. 211 On the rear lid:
Remove the cover
Fig. 212 On the rear lid:
Remove the lamp holder
Operating instructions
Complete operations only in the sequence given:
Always take the checklist into account and take the necessary ac-
1.
tions ⇒ p age 330.
Open the rear lid ⇒ p age 83.
2.
Extract the cover carefully using the flat part of the screwdriver from
3. the vehicle tool kit as a lever (⇒ F ig.
⇒ F ig. 211
.
1
Release the lamp holder connector by pulling on the red connector
4.
block.
Press on the attachment tabs in the direction of the arrow
5.
⇒ F ig. 212
and pull out the lamp holder.
6. Replace the faulty bulb by a new identical bulb.
Install the lamp holder. The attachment tabs should audibly click
7.
into place.
8. Insert the cover. The cover should lock into place.
Practical tips
If and when 335
200) on the indent

Technical Specifications