Seat ALHAMBRA Owner's Manual page 103

"Leaving home" Necessary operations
To switch sys- – Unlock the vehicle when the light switch is in position
tem on:  and the photo sensor detects darkness.
– Automatically, at the end of the delay period.
To switch sys- – When the vehicle is locked.
tem off: – When the light switch is turned to position .
– When the ignition is switched on.
Lighting around the exterior mirrors
The lighting around the exterior mirrors illuminates the door area on enter-
ing and leaving the vehicles. It comes on when the vehicle is unlocked,
when the vehicle door is opened and when the "Coming home" or "Leaving
home" function is switched on. If the equipment includes the light sensor,
the lighting around the exterior mirrors only comes when it is dark.
Note
● The time taken for the headlights to go off can be changed in the
menu and the function can be switched on or off ⇒ p age 62.
& Visibility
● When the "Coming home" function is on, if the vehicle door is opened
there is no audible warning signal to advise that the light is still on.
Safety First
Lights
Operating instructions
Headlight range control, instrument and switch lighting
Instrument and switch lighting
1
When the headlights are switched on, the brightness of the instruments
and switch lighting can be regulated to suit your requirements by turning
⇒ F ig. 62
the switch .
1

Headlight range control
2
The headlight range control is modified according to the value of the
2
headlight beam and the vehicle load status. This offers the driver optimum
visibility and the headlights do not dazzle oncoming drivers ⇒
The headlights can only be adjusted when the dipped beam is switched on.
To reset, turn switch :
2
Value Vehicle load status
– Two front occupants, luggage compartment empty
1 All seats occupied, luggage compartment empty
Practical tips
Lights and visibility
Fig. 62 Next to the
steering wheel: instru-
ment and switch lighting
control and headlight
1
range control
2
.
a)
Technical Specifications
101
