Seat ALHAMBRA Owner's Manual page 336

334 If and when
To replace the front bumper bulbs
Complete operations only in the sequence given:
Always take the checklist into account and take the necessary ac-
1.
tions ⇒ p age 330.
2. Pull the cover forwards, in the direction of the arrow
Unscrew the attachment screw
3.
vehicle tool kit ⇒ p age 323.
Tilt the headlight slightly forward and extract it from its lateral at-
4.
tachments
5. Release the connector
Rotate the lamp holder
6.
the arrow, and pull it out backwards with the bulb.
7. Replace the faulty bulb by a new identical bulb.
Place the bulb holder in the headlight and rotate to the right all the
Fig. 209 On the right-
8.
hand side of the front
way.
bumper: Removing the
Insert the connector
headlights
9.
audibly click into place.
Place the headlight into its position
10.
tilt it backwards.
11. Tighten the attachment screw
12. Replace the cover on the bumper
Fig. 210 Changing the
bulbs in the headlights
using the screwdriver from the
1
⇒ F ig. 210
(small arrows).
and remove it.
1
to the left all the way, in the direction of
2
on the lamp holder . The connector must
1 2
⇒ F ig. 210
(small arrows) and
⇒ F ig. 209
using the screwdriver.
1
⇒ F ig.
209.
⇒ F ig.
209.
