Care And Maintenance - Zoeller 1043-006 Manual

CARE AND MAINTENANCE

The motor housing of pump is completely sealed and requires no service. Disassembly of the motor
housing or alteration of the power cord voids all warranty.
1. Periodically unplug pump to inspect the inlet and
remove any debris. Make sure your hands are
dry and that you are not standing in water.
2. If pump clogs, unplug the pump from the power
supply. Attach one end of a garden hose to a
spigot and the other end to pump discharge.
Turn on the spigot to run water through pump to
clean it out.
3. If the pump becomes clogged, remove the
screen and clean out the area.
Debris in the intake should be routinely removed
from the bottom of the pump to prevent damage
to the pump, which will void the warranty.
1
Remove
debris
2
3
Remove
Screen
6
Unplug
pump