Operation - Zoeller 1043-006 Manual

3. Plug pump into a properly grounded 115V AC
power outlet.

OPERATION

1. The pump will run until it senses that it is no
longer pumping water and then shut off.
The pump will then turn on every three minutes
for fifteen seconds and then off if it does not
sense water.
2. To prevent unnecessary wear, unplug the pump
from the power output when not in use.
CAUTION: Extended usage of the pump in a
partially submerged or non-submerged situation
may cause the pump to overheat due to lack of
heat dissipation from the water. If this occurs,
the pump will shut itself off until the motor
cools to its normal temperature. Repeated
overheating may cause damage to the pump.
3
1
2
5
GFCI Outlet
Low Water
IL2059
Unplug
RESET
Pump
TEST
Low Water