Otto Bock Genium Patient Information page 17

Prosthesis Status Inquiry
1. Selecting and confirming "Status" displays the following:
• The total pedometer value ("Total")
• The daily pedometer value ("Day")
• The battery capacity of the prosthesis in percent ("Battery").
• The estimated remaining operating time of the prosthesis in hours during active use and at rest
(e.g. sitting function) („Stb/Act" for Standby/Active)
• The next service due date
2. Selecting "Day" and pressing the selection key resets the day step counter.
Remote Control Settings
1. Select "Settings" in the main menu and confirm using the input key.
2. Adjust the date and time by selecting the corresponding line. Change settings using the navigation keys.
3. Additional connections can be set up ("Pairing") and connections can be deleted ("Delete connec-
tion") (see the section Prosthesis Administration).
4. The font size in the menu bar can be changed by selecting "Zoom".
5.– 6. On the screen, use
• to select the normal (1, ) or large font size (2,
7.
Prosthesis Administration
Connections with up to four different prostheses can be stored in a single Remote Control. Conversely,
a prosthesis can only be connected to a single Remote Control. Complete the following steps to add
additional connections:
Genium - Bionic Prosthetic System
Information about the firmware version of the knee joint and signal strength
is accessible under „Info". Select the arrow symbol to return to the main
menu on the display.
) and confirm using the input key.
Ottobock | 41