Otto Bock Genium Patient Information page 14

Status Bar
The status bar shows:
1. Battery capacity of the Remote Control
2. Charging state of the knee joint with percentage indicator
3. Current MyMode
4. In case of a deviation from normal knee joint functionality (e.g. when
the charger is connected), an exclamation mark is shown in the
status bar at the top right. The current MyMode is not displayed in
some of these situations.
MyMode Switching with the Remote Control
Once an active connection to the prosthesis has been established, the Remote Control can be used to
switch between MyModes.
1. Select "MyMode" in the main menu and confirm with the input key.
2. A list of the available MyModes is displayed. Use
the input key. If the list of MyModes was called up accidentally, the active MyMode can be selected again.
3. The Remote Control can be turned off by selecting and confirming "Power off".
Changing Prosthesis Settings
Once an active connection to the prosthesis has been established, the settings of the respective My-
Modecan be changed using the Remote Control.
1. Select "Device settings" from the main menu and confirm with the input key.
2. A list of available parameters for the current MyMode is displayed. Select the desired parameter
and confirm with the input key.
3. A screen with a scale, the current parameter value and the limit values is displayed. Use
change the setting as desired and confirm with the input key.
4. The list of parameters can be closed without making changes by selecting and confirming the arrow
symbol. To select the arrow symbol, use the input key
38 | Ottobock
to select the desired MyMode and confirm with
.
Genium - Bionic Prosthetic System
to