T Echnical T Echnical Troubleshooting Guide Roubleshooting Guide - T-Fal Emerilware Instructions For Use Manual

TECHNICAL TROUBLESHOOTING GUIDE
Problems
The kneading paddles remain
stuck in the bread pan.
The kneading paddles remain
stuck in the bread.
After pushing the button, nothing happens.
After pressing the
on but no kneading takes place.
After a delayed start, the bread has not risen
enough or nothing happens.
Burnt smell
button, the motor is
Solutions
Let the bread pan soak.
Lightly oil the kneading paddles before mixing the
ingredients in the bread pan or use the accessory
to remove them (page 11).
The machine is too hot. Wait 1 hour between
2 cycles.
A delayed start has been programmed.
The pan has not been correctly inserted.
Kneading paddle missing or not installed properly.
The button was not pressed after programming.
The yeast has come into contact with salt
and/or water.
Kneading paddle missing.
Some of the ingredients have fallen outside of the
bread pan. Let the machine cool down and clean
the inside of the machine with a damp sponge.
The mixture has overflowed. The quantity of the
ingredients is too great, most likely liquid. Follow
the proportions given in the recipe.
21