Selec Selecting Bre Ting Bread Setti Ad Setting Prog Ng Program Ram; Selec Selecting Br Ting Bread W Ead Weight Eight; Selecting Crust Color; Starting The Program - T-Fal Emerilware Instructions For Use Manual

USING YOUR BREAD MAKER
Selecting Bread Setting Program
• The default setting of Program 1 (Basic White) will automatically be
displayed.
• If you want to change the default setting, press the
indicator light for the desired program comes on.
• To scroll through all the programs 1 to 14, press the
(Fig. 8a) (The time corresponding to each program selected is automatically
displayed.)
Selecting The Bread Weight
• The default setting of 2.5 lbs. will automatically be displayed.
• If you want to change the default setting, press the
indicator light for the desired setting comes on. (Fig. 9)
• Programs 5, 9, 11, 12, 13, 14 do not have weight setting options.
Selecting The Crust Color
• The default setting of Medium will automatically be displayed.
• If you want to change the default setting, press the
indicator light for the desired setting comes on. (Fig. 10)
• Programs 5, 11, 12 and 13 do not have a crust color setting option.

Starting The Program

• To start the selected program, press the
The program will start and the time corresponding to the program will be displayed. The successive
steps will take place automatically, one after the other.
Using The Delayed Start
• You can program the bread maker up to 15 hours in advance to have your bread ready at the
time you want. This function cannot be used on programs 5, 6, 9, 10, 11, 12, 13, 14.
• This step comes after selecting the program, weight and crust color. The program time will be
displayed. Calculate the time difference between the moment when you start the program and the time
at which you want your preparation to be ready. This calculated time should now be programmed into
the machine by using the
Short presses change the time by intervals of 10 minutes and a short beep will be heard. Holding the
button down will give continuous scrolling of 10-min intervals.
Note: The machine will automatically calculate the time of your selected
program.
For example, it is 8 pm and you want your bread to be ready for 7 am the
next morning. Program 11:00 using the
button. A beep will be emitted. The indicator light (9) switches on and the
timer colon (Fig. 11) blinks. The countdown begins. If you make a mistake or
want to change the time setting, hold down the
the default time is displayed. Start the operation again. With the delayed start
10
button. (Fig. 8b above)
more and less buttons.
more and
button until the
button repeatedly.
button until the
button until the
buttons. Press the
button until it beeps and
Fig. 8a
Fig. 8b
Fig. 9
2 lb. 2.5 lb. 3 lb.
Fig. 10
Fig. 11
.5 lb. 3 lb.