T-Fal Deep Fryer Instructions For Use Manual

T-Fal Deep Fryer Instructions For Use Manual

T-fal deep fryer instructions for use

Advertisement

Fryer
Instructions for Use

Advertisement

Table of Contents
loading

Summary of Contents for T-Fal Deep Fryer

  • Page 1 Fryer Instructions for Use...
  • Page 2: Table Of Contents

    Fryer TABLE OF CONTENTS Important Safeguards ........3 Introduction .
  • Page 3: Important Safeguards

    Never pour shortening directly into the deep fryer pot or basket as this will lead to deterioration of the appliance. 23. If the fryer has a removable pot, never remove it while the deep fryer is on.
  • Page 4: Fryer Overview

    Emeril’s fryer is something you’ve never seen before. Designed to out-fry all others, the Emerilware™ Fryer by T-fal crispier than you ever dreamed. Your new Fryer has a system that automatically filters, drains and stores the oil. Your oil will stay clean and last longer, for healthier frying. Plus, you’ll able to use the oil, again and again.
  • Page 5: Descriptive Diagram/Reset Function

    RESET function: cut-out is activated, the appliance will shut off automatically and an error code will appear on the display. Unplug the appliance, let it cool and follow the instructions for use. If the error code still appears, push the safety cut-out RESET button (found on the back of the control unit) with a toothpick or similar non- metallic object.
  • Page 6: Oil Box Container Control Lever

    USING YOUR FRYER Using the Oil box container control lever The Oil box control lever has 3 positions. Fry Position: to fry. Automatic Oil Filtration Position: to drain and filter the oil into the oil box. Oil box Position: to allow for removal of the oil box container. Before first use •...
  • Page 7: Getting Started

    USING YOUR FRYER Getting Started • Fill the bowl with oil. The oil level should always be between the MIN and MAX level of the bowl. Do not exceed the maximum fill line as boiling oil may overflow during frying and can cause severe burns.
  • Page 8: Frying Process

    Frying process • Place the Oil Box control lever on the Fry position. • After the bowl has been filled with oil, plug in the fryer without the frying basket; the Power indicator light will come on. • Press until the (« 00 ») shows on the display. The temperature is automatically set on 320°F. You can adjust the temperature from 320°...
  • Page 9 FRYING PROCESS • Frying is complete when: - The timer sounds, indicating the cooking time has elapsed. - The food is of the desired color and texture. • To stop the signal, press the touchpad • Remove the lid. Allow excess oil to drain by hooking the basket on the elevated support on the inner bowl. •...
  • Page 10: Cooking Tables

    The cooking times are a guide only. They could vary depending on quantity, taste, electricity supply etc... • For best results and to prevent overflowing, use the traditional method of frying hand made French fries - first cycle at 320 °F/160 °C - second cycle at 374 °F/190 °C •...
  • Page 11: Cleaning And Maintenance

    CLEANING AND MAINTENANCE • For your safety, the appliance automatically drains all kinds of oils (or solid shortenings) when it is cool enough (approximately 3 hours after the last cooking). • When you are finished cooking, turn the Oil box control lever to the Automatic oil filtration position.
  • Page 12: Change Oil

    CLEANING AND MAINTENANCE Change oil: Your fryer is equipped with an oil change indicator. • After 10 uses, the light will flash to indicate that the oil should be • Change the oil/fat and press the Reset button on the panel until the Dishwasher Safe: very easy to clean.
  • Page 13: Troubleshooting

    IF YOUR FRYER DOES NOT WORK PROPERLY Problems and possible causes The appliance is not plugged in. The cooking temperature is not indicated. The Max. marker for filling the bowl has been exceeded. The Max. marker for filling the frying basket has been exceeded.
  • Page 14: Warranty

    (register receipt) to a T-fal return facility. If product is returned without proof of purchase it will be renewed based on the manufacturing production week and year to determine warranty coverage.
  • Page 15 Ref. 5081614 5/06...

This manual is also suitable for:

Emerilware

Table of Contents