Clean Air Cleaner; Load Cells; Wiring Connections To Scale Box - Meridian Seed Express 275 DX Operator's Manual

4. Place a pan under the drain plug.
5. Remove the drain plug and allow oil to drain
for ten minutes.
6. Reinstall the engine drain plug and tighten.
7. Dispose of the oil in an approved container.
Follow industrial disposal regulations.
8. Fill the engine with SAE 10W-30 oil for general
usage. If the engine is operated in more
extreme conditions, refer to the OEM manual
for oil recommendations.
9. Run the engine for one minute and recheck
the oil level. Add oil as needed.

10.3.4 Clean Air Cleaner

Check the air cleaner daily before each usage.
Clean it every three months or 50 hours of
operation (clean it more frequently when used in
dusty conditions).

10.4 LOAD CELLS

Four load cells are used with the weighing system.
There is no maintenance required for these load
cells. If the seed tender does not seem to be
functioning correctly, refer to the Troubleshooting
section, call an authorized dealer, or call the
factory.
10.4.1 Wiring Connections to Scale
Box
All four load cells are connected to the scale box.
If the system is not working correctly, make sure
the wiring connections are securely attached to the
back of the scale box. If the problem continues,
contact Meridian.
47