Clean Air Cleaner; Load Cells; Wiring Connections To Scale Box - Meridian SEED EXPRESS Series Operator's Manual

10.3.4 Clean Air Cleaner

Check and remove any debris from the foam
cover of the air cleaner daily before each usage.
Thoroughly clean or replace the foam cover every
threemonthsor50hoursofoperation(cleanit
morefrequentlywhenusedindustyconditions).

10.4 LOAD CELLS

Four load cells are used with the models equipped
with a weighing system. There is no maintenance
required for these load cells. If the seed tender
does not seem to be functioning correctly, refer
to the Troubleshooting section, call an authorized
dealer, or call the factory.
Note: The load cells on the 240RT and 375RT
are contained within the frame of the seed tender.
This photo is for instructional purposes only and
does not represent the actual design of the seed
tender itself.
10.4.1 Wiring Connections to Scale
Box
All four load cells are connected to the scale box.
If the system is not working correctly, make sure
the wiring connections are securely attached to the
bottom of the scale box. If the problem continues,
contact Meridian.
45