13. If operating manually, open the slide gate with
the wireless remote transmitter or the seed
tender control panel for the desired seed flow.
14. If necessary, when the planter is filled, close
the slide gate and then stop the conveyor belt.
15. Return the conveyor to the transport position
and install the retaining clips and lock pins.
If the seed tender is being moved within a
field location, place the conveyor in the Field
Transport position and install the lock pin. If
the seed tender will be travelling on the road,
place it in the Road Transport position and
install the lock pin.
16. If necessary, close the roll-up tarp and secure
the handle in the storage position.
41