8. Move fuel valve lever (4) to the ON position
(toward the front of the machine).
9. To start a cold engine, move choke lever (3) to
the CLOSED position (toward the back of the
machine).
10. Start the engine and move throttle lever (5) to
run the engine at full speed.
11. Slightly raise the conveyor out the storage
cradle. Also, extend the conveyor to release
the lock mechanism.
NOTE: This lock prevents the conveyor from
rotating independent of the swing arm. If the lock
is not released, the conveyor cannot be placed in
a loading position.
12. Use the seed pan handle to raise the conveyor
out of the storage position.
38
13. Use the Conveyor Right button on the remote
transmitter to swing the conveyor into a
loading position, as shown.
14. If desired, release the stand lock pin and
rotate the it downward. Engage the lock pin
when the stand is fully extended.