Originals And Paper - Toshiba E-STUDIO 555 Troubleshooting Manual

8.WHEN SOMETHING IS WRONG WITH THE EQUIPMENT

Originals and paper

Problem Description
The original is jammed.
Paper is jammed.
Two or more sheets of paper are
fed together.
Sheets do not align when exiting.
Cause
The original is unavailable on the
equipment.
The paper is unavailable on the
equipment.
The paper size setting registered for
the equipment is inconsistent with
paper in a drawer or on the bypass
tray.
The stack of paper exceeds the
loading line indicated on the side
guide.
There is too little or too much
clearance between the paper and the
side guide of the drawer.
Hidden jammed paper has not been
removed.
Sheets of paper are stuck together.
Sheets are placed in the drawer with
the wrong side up.
When You Think Something Is Wrong With the Equipment
8 WHEN SOMETHING IS WRONG WITH THE EQUIPMENT
Corrective Action
Check whether the original is available on the equipment.
For details, refer to Chapter 2 of the Copying Guide.
Check whether the paper is available on the equipment.
For details, refer to Chapter 1 of the Copying Guide.
Match the size of the paper placed in the drawer or on the
bypass tray and the size registered on the equipment.
For Details, refer to Chapter 1 and 2 of the Copying
Guide.
Remove some paper to set it within the height limit line
indicated on the side guide.
Adjust the space between the paper and the side guide or
the end guide not to take much spaces.
For details, refer to Chapter 1 of the Copying Guide.
Check the sign again on the touch panel to see where the
jam occurred.
P.11 "Clearing a Paper Jam"
Loosen the stack of paper well and set them again.
Check the printing side of the sheets and place them
correctly. Information about the printing side may be given
on the wrapping paper of the sheets.
If you cannot find which side is the printing side, try
printing on both sides to see if the sheets align when
exiting.
97