Originals And Paper - Toshiba e-STUDIO330AC Hardware Troubleshooting Manual

2.WHEN SOMETHING IS WRONG WITH THE EQUIPMENT
Problem Description
The window "Enter the user
name and Password"
appears.
A message is displayed on
the touch panel.
The equipment reboots
automatically.
The power of this
equipment has been turned
OFF.
The stapler does not work
even if an original is set in
the offline stapler.
 Originals and paper
Problem Description
The original is misfed.
Cause
The equipment is managed
under the user management
function.
Some trouble occurred in the
equipment (or the message is
displayed just for an ordinary
operation).
The auto-recovery function
works because a memory or
operation abnormality has been
detected.
The equipment has
automatically been turned OFF
by means of the sleep mode
feature.
The front cover of the
equipment or the automatic
duplexing unit cover has been
opened.
The equipment is in the Sleep
mode.
The equipment is in the Super
Sleep mode.
Cause
The original is unsuited for the
equipment.
When You Think Something Is Wrong With the Equipment 51
Corrective Action
Enter your user name and password. If you do not
know them, contact the administrator of the
equipment.
See the meaning of the message referring to the
listing below.
 P.11 "Messages Displayed on the Touch Panel"
Due to rebooting, the equipment has been
recovered to the normal condition. You can
operate the equipment as usual.
To prevent this, change the setting of the sleep
mode to [Sleep].
Close the cover opened.
Press the [ENERGY SAVER] button to clear the Sleep
mode.
Refer to Chapter 1 of the Quick Start Guide.
Press the [ENERGY SAVER] button to clear the
Super Sleep mode.
Refer to Chapter 1 of the Quick Start Guide.
Corrective Action
Check whether the original is suitable for the
equipment.
For details, refer to Chapter 2 of the Paper
Preparation Guide.