Operating Displays Of The Devices - Siemens SENTRON 7KN POWERCENTER 3000 Manual

3.2.1

Operating displays of the devices

LED name
PC ON/WD
L1 RUN/STOP
L2 ERROR
L3 MAINT
L1 RUN/STOP
and
L2 ERROR
and
L3 MAINT
7KN POWERCENTER 3000
Manual, 10/2019, L1V30579222003-01
Status
Off
Green
Flashing green / yellow (4 Hz) Hardware self-test
Yellow
Flashing red (4 Hz)
Off
Flashing green (2 Hz)
Green
Yellow
Off
Red
Yellow
Off
Flashing yellow (2 Hz)
Yellow
Red
Flashing yellow (2 Hz)
3.2 Design of the devices
Description
No voltage
BIOS active
Shutdown
Hardware monitoring active
Not used
7KN Powercenter 3000 starts
7KN Powercenter 3000 active
Not used
Not used
Serious error
Warning
Not used
Firmware update running (do not switch off)
Not used
Not used
The device "identifies" itself.
An "activate flashing mode" was started dur-
•
ing the Ethernet search via powerconfig.
The "Identify" command has been executed
•
via the Web UI.
Description
15