Support Of Mobile Devices; National Standards, Regulations And Legislation - Siemens DMS8000 Application & Planning

2.2

Support of mobile devices

2.2.1

National standards, regulations and legislation

Building Technologies
CPS Fire Safety
Mobile devices (smartphones and tablets) are supported in MM8000 by the DMS8000
Web Services and the MM8000 Alarms app.
The DMS8000 Web Services interface (REST Web API) enables any client supporting
this Representational State Transfer (REST) Application Program Interface (API) to
handle MM8000 events.
The MM8000 Alarms app is based on this interface and lets an operator view and
handle events with Acknowledge and Reset commands. Once a MM8000 Alarms app
user is authenticated, the server sends to the MM8000 Alarms app only the informa-
tion and commands that the user is authorized to see and execute based on his/her
security profile.
Siemens products are developed and produced in compliance with the relevant Euro-
pean and international safety standards. Should additional national or local safety
standards or legislation concerning the planning, assembly, installation, operation or
disposal of the product apply at the place of operation, then these must also be taken
into account together with the safety regulations in the product documentation.
WARNING
It is in the responsibility of the Regional Countries (RC's) to carefully check
whether the use of the MM8000 Alarms app (or externally developed app's) for
handling events from MM8000 is allowed by national or local safety standards or
codes of practice.
If local law or codes of practice do not allow controlling events from mobile devices,
the DMS8000 Web Services can be set to view only mode.
® For details about how to set the DMS8000 Web Services in view only mode, see
the MM8000 ICC (A6V10062413). To learn how to obtain this document, see the
Documentation resource information section on p. 5.
MM8000 Server requirements
The following is required on the MM8000 Server PC for supporting mobile devices:
- Internet Information Services (IIS)
- MM8000 installed with the setup type Stand-alone (MM8000) and the option
Web Services enabled
- MM8000 license including the Base Station Option Web Services
- The Web Services are enabled in the configuration on the Station Node
- Internet connection or connection to a WLAN
® For details about IIS settings MM8000 installation and configuration, see the
MM8000 ICC (A6V10062413). To learn how to obtain this document, see the
Documentation resource information section on p. 5.
Mobile devices requirements
The following is required on the mobile device:
- Smartphone or tablet with Android operating system version 4.0 or later
- iPhone or iPad with iOS version 6 or later
- MM8000 Alarms app installed
049_DMS_DMS8000_Application_Specification_Planning_MP4.81_A6V10063710_a_en.doc
Management level configurations
19
09.2016