Modesty Panel - IAC INDUSTRIES Workmaster E Series Assembly Instructions Manual

Workmaster Modesty Panel
Item Description
1

Modesty Panel

HARDWARE KIT HWR030
A Cap, Plug .875 DIA Black Heyco #2703 2
B Washer, 1/4 Flat Black
C Bolt, 1/4-20 X .75 HHW Black
D Screw, #14 X 1.00 PPH SMS Black
Note: This instruction can also be used for mounting modesty panels to benches with one and two cabinets.
Step 1:
Install the modesty panel to the back of the pedestal legs of the bench by using four 1/4-20 x .75 hex head
bolts item C and four 1/4 flat washers item B. Install plastic caps as needed.
Please Note: To retrofit a modesty panel to an existing workbench place the modesty panel against the rear
of the pedestal legs and using the slots in the modesty panel as a template drill four 7/32" diameter holes in
the pedestal legs. Attach the modesty panel using four # 14 x 1.00 screws item D and four 1/4 flat washers
item B.
Qty
1
4
4
4
30