IAC INDUSTRIES Workmaster E Series Assembly Instructions Manual page 20

Install the unistrut nut item F into the pedestal leg assembly channel by first aligning the nut with the opening
of the channel then pushing it into the pedestal channel compressing the spring. Rotate the nut clockwise and
release the tension on the spring. The unistrut nut can be moved forward and backward to adjust the location
of the footrest in relationship to the front of the bench. The footrest keeper in the bracket attached to the
cabinet must be aligned with the location of the unistrut nut in the pedestal channel.
Step 4:
Install the footrest tube item 1 by inserting the round end into the footrest keeper item D then placing the flat
end across the pedestal channel. Attach the footrest tube to the pedestal using the 1/4-20 X 1.00 bolt item G
and one 1/4 flat washer item B. The location of the footrest can be adjusted forward and back to fit the
operators needs.
Workmaster Footrest Tube Two Cabinets
20