IAC INDUSTRIES Workmaster E Series Assembly Instructions Manual page 27

Workmaster Universal CPU Holder Slide-Out
Item Description
1 CPU Holder Swivel Adjustable Waterloo
HARDWARE KIT HWR307
A Bracket CPU holder UNI WSM 3.11H
B Screw # 14AB x .625 PPH SMS BLACK
Screw #8 x .375 PPH "P" BLACK
C
Step 1:
Remove CPU holder and the hardware kit included from the box. Using the six zinc plated wood screws
included in the hardware kit of the CPU holder attach the CPU holder WSM bracket item A to the underside of
your work surface, positioning it so that the CPU holder will not interfere with other items on the bench.
Step 2:
Attach the CPU holder top slide bracket to the CPU holder WSM bracket item A using four #14AB screws
item B making sure the opening in the front of the slide bracket is toward the front of the bench.
Note: Install all four screws into the holes with equally amount for each screw making sure screws are all the
way in. CPU weight with allow unit to slide back and forward freely.
Qty
1
1
4
2
27