DAVIS Vantage Pro2 Sensor Suite User Manual page 22

To change to another ID, use a ballpoint pen or paper clip to toggle DIP switches
#1, 2, and 3. The settings for Transmitter IDs 1 - 8 are shown in the table below.
Set the Vantage Pro2 console to the same ID as the transmitters, as described in
the Vantage Pro2 Console User Manual.
Using Multiple Transmitting Stations
This table shows the maximum number of each type of station that can be used with
a single Vantage Pro2 console.
to eight transmitters (stations).
Integrated Sensor Suite (sensor suite)
Anemometer Transmitter Kit*
Leaf & Soil Moisture/Temperature Station
Temperature Station
Temperature/Humidity Station
*Replaces the sensor suite anemometer.
**Two are allowable only if one stations has only leaf wetness and one has only soil moisture sensors.
For example, a network can either have both a Leaf Wetness/Temperature station and a Soil Moisture/
Temperature station, or it can have one combined Leaf Wetness and Soil Moisture/Temperature station.
18
ID C S
ODE WITCH
#1
(default)
#2
#3
#4
#5
#6
#7
#8
The console can receive signals from a total of up
Station Type
1 S
WITCH
off off
off off
off ON
off ON
ON off
ON off
ON ON
ON ON
2 S 3
WITCH
off
ON
off
ON
off
ON
off
ON
Maximum Number
1
1*
2**
8
8