Integrated Sensor Suite with
Fan-Aspirated Radiation Shield
For Vantage Pro2™ and Vantage Pro2 Plus™
Installation Instructions Addendum
The Vantage Pro2™ Integrated Sensor Suite
(ISS) with the Fan-Aspirated Radiation Shield
uses a combination of fan-aspiration and
shielding to minimize temperature measurement
errors due to the effects of solar radiation.
Fan-Aspirated ISS Addendum
Overview
This addendum provides additional information
specific to the installation and use of ISS models
containing the fan-aspirated radiation shield
only, and is intended to be used in conjunction with the "Integrated Sensor
Suite Installation Manual."
The table below shows the location of the information required to install
and maintain your Fan-Aspirated ISS system.
Section/Procedure
Tools for Setup
Preparing the Anemometer
Preparing the Radiation Shield
Powering ISS and Testing Communications
Powering and Testing the Fan
Choosing a Site for the ISS
Theory of Operation
In the ISS
In This
Installation
Addendum
Manual
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1