Optional Starter Anti-Grind Circuitry; Disabling The Remote Start System; Remote Programming - Directed Python 4115P Owner's Manual

Optional Starter Anti-Grind Circuitry

This system includes an anti-grind circuit that can prevent damage to
the starter motor if the key is turned to the start position while the remote
start is ON.
Note: Anti-grind circuitry only works if an optional relay has been add-
ed and the remote start system is op er at ing the motor.

Disabling the Remote Start System

When the Remote Start shutoff switch is set to the OFF position, remote
engine starting is defeated. DO this when the vehicle is being serviced
or driven by someone unfamiliar with remote start system operations.
Location Of Shutdown Switch: _________________________

Remote Programming

Your system comes with the remote controls already programmed, how-
ever if you are replacing or adding additional remote controls, they
must be programmed to the system prior to operating the system. To
program the remote, you need to know where the valet button is lo-
cated. If the horn honk is not connected, the main unit LED needs to be
visible for visual confirmation. If you cannot locate or access the main
unit, it is recommended that you visit your authorized dealer for remote
programming. The system is capable of accepting up to four remote
controls.
1. Turn key to the ON position
2. Within 10 seconds, press and release Valet button one time.
3. Within 10 seconds, press and hold the Valet button. The LED on the mod-
ule flashes one time and the horn honks (if connected) to confirm entry into
6
© 2015 Directed. All rights reserved.