Warning Tone Beep; Caller Identification - Topcom BUTLER 3900 User Manual

Butler 3900/Twin/Triple/Quattro

7.12 WARNING TONE BEEP

When one handset is on line, it emits the warning tone beep every 20 seconds if the batteries
are low or when the handset is out of range.

7.13 CALLER IDENTIFICATION

Caller identification is only available if you have subscribed to this service with your
telephone operator.
When you receive an external call, the caller's number will appear on the display as the
telephone rings.
If the caller's number is already recorded in the phone book, the caller is identified by his or
her name recorded in the phone book instead.
The telephone does not show the name sent by the operator.
If the call is not answered for 3 seconds, the sum of unanswered calls will be displayed and
CLI icon of the handset appears.
?
The handset indicator LED and base CID LED
7.13.1 List of calls
Your telephone keeps a list of the last 20 calls received in memory. This function is available
only if you are subscribed to the caller ID information. The correspondents that have called
are identified by their telephone number or name in the same way as in caller identification.
The presence of new / unanswered calls is indicated by the flashing of CLI LED
base and Handset indicator LED. To consult the list of calls:
1. Press and hold
the list, 'NO CALL' will appear.
2. Scroll through the calls by using up
shown before the telephone number if the name is stored in the phonebook. If this call is
unanswered or this call record is not read, CID icon
Note: if the caller's name is longer than 9 characters or the telephone number is longer
than 9 digits, press down
4. Press down
5. Press to add this entry in the phonebook when the telephone number is on display
if it's not already stored:
• 'STORE ?' will appear, press
confirm. Enter the telephone number and press
melody which will be heard when this number is calling using up/down keys and
press
INT
6. To call back a correspondent, simply press the key
name is displayed.
** Only when the network send the time/date together with the telephone
number!!! On networks with caller ID in DTMF, no time and date will be
displayed.
14
key for 2 seconds or choose menu Call Log. If there are no calls in
?
arrow to see the complete name or number.
again to see the time and date when the call is received**
INT
to confirm. The entry will be stored in the phonebook.
blinks till all missed calls are read.
?
or down arrows. The caller's name will be
is shown.
?
to confirm. Enter the name and press
INT
when their telephone number or
to confirm. Select the
Butler 3900/Twin/Triple/Quattro
of the
?
to
INT