Butler 3900/Twin/Triple/Quattro
if your additional handset is a Butler 3900
3. Enter the menu by pressing
4. Select HANDSET using up
5. Press
INT
6. Select REGISTER using up
7. Press
, 'SEARCHING' appears, the handset starts searching for the DECT base.
INT
If the base is found, 'ENTER PIN' appears. If the handset does not locate the base, it will
return to the standby mode after 30 seconds.
8. Enter the Base PIN code (0000 by default ) or press Cancel C key to exit.
9. Press
to confirm, one double tone beep indicates the success of the registration.
INT
If the registration fails, try again by checking that you are not in an environment where there
is interference. Move closer to the base.
if your handset is another model
After starting the registration procedure on the base, refer to the handset manual to find out
how to register the handset. The handset must be GAP compatible.
When a handset is associated with a base, it gets a handset number by the base. It is this
number that is displayed on the handset and must be used for internal calls.
10.2 REMOVING A HANDSET
You can remove a handset from a base to allow another handset to be registered. To remove
this handset, another registered handset is needed.
1. Enter the menu by pressing
2. Select BASE using up
3. Press
INT
4. Select DEREGISTER using up
5. Press
INT
6. Enter the base PIN code
7. Press
INT
8. Select the handset to be removed using up
9. Press
INT
10. Press
INT
After the handset is removed, the antenna
DECT GAP Profile only guarentees that basic calling-functions will work
correctly between different brands/types. There's a possibility that
certain services (like CLIP) will not work correctly.
10.3 SETTING UP A HANDSET ON ANOTHER BASE
If you want to use a Butler 3900 handset with a base of another model. The base must be
GAP compatible.
1. To get the base into registration mode, refer to the user manual of the base.
2. Carry out steps 3 to 9 of paragraph 10.1.
24
and down
to validate when 'CONFIRM?' appears or press Cancel C key to exit
and down
keys
and down
keys
keys
and down
and down
icon disappears and '----' appears.
keys
keys
Butler 3900/Twin/Triple/Quattro