Out Of Range Warning; Flash Button (R); Setting The Flash Time; Activate/Deactivate Key Tones - Topcom COCOON 85 Operating Manual

Cocoon 85/95

4.12 Out of range warning

When the handset is out of the working range of the base unit during a
conversation, the unit will emit a warning signal every two seconds to
warn the user that he has to move closer towards the base unit. If the
user is not in the working range of the base unit within 10 seconds, the
connection will be broken.

4.13 Flash button (R)

When you press the R button, also called flash or recall, the unit generates
a line interruption (of 100 ms). It gives you the possibility to use the special
s e rvices of your telephone provider and/or to transfer calls when you have a
telephone exchange.

4.13.1 Setting the Flash time

• Press the Set button
• Press the R button.
• The actual flash time is shown on the display.
• Press numerical button '1' several times to change the flash time (100ms,
260ms en 600ms).
• Press the Memory button

4.14 Activate/deactivate key tones

• Press the Set button
• Press numerical button '1'.
• P ress numerical button '1' again to activate/deactivate this function.
• Press the Memory button
Default setting : key tones activated.

4.15 Setting the ring melody

• Press the Set button
• Press numerical button '2'.
• Select the desired ring melody (1-4).
• Press the Memory button
Default setting : ring melody 2

4.16 Setting the ring volume

• Press the Set button
• Press numerical button '3'.
• Select the desired ring volume (off, low, high) by pressing numerical
button 1 re p e a t e d l y.
• Press the Memory button
Default setting : ring volume high
.
to confirm.
.
. The unit emits a confirmation tone.
.
. The unit emits a confirmation tone.
.
. The unit emits a confirmation tone.
31