Oven Timer Operation - Belling 640SS Installation And User Instructions Manual

To set timer to switch OFF automatically
(with cooking duration from 0 hours 01
minute to 23 hours 59 minutes)
Set the main oven thermostat to the required cooking
temperature. Set the cooking duration by pressing button
2 and setting the length of cooking time with buttons 5
or 6. The AUTO and
display. At the end of the cook duration the oven will
switch off, the symbol will disappear from the
display, AUTO symbol will flash and the buzzer will sound
and continue for 7 minutes or until button 4 is pressed
once. If cooking is complete, return the main oven
thermostat to the off position.
To set timer to switch OFF automatically (with end of
cooking time from 0 hours 01 minute to 23 hours 59
minutes)
Set the main oven thermostat to the required cooking
temperature. Set the cooking duration by pressing button
3 and setting the end of cooking time with push button6.
The AUTO and symbols will appear on the display.
At the end of cooking time the oven will switch off, the
i symbol will disappear from the display and the
AUTO symbol will flash and the buzzer will sound and
continue for 7 minutes or until button 4 is pressed once.
If cooking is complete, return the main oven thermostat
to the off position.
To set timer to switch ON and OFF
automatically (with the start of cooking
time delayed from 0 hours 01 minutes to
10 hours 00 minutes)
Set the main oven thermostat to the required cooking
temperature. First programme the cooking time, by
pressing button 2 and setting the length of cooking time
with buttons 6. Both the AUTO and
appear on the display. Set the stop time by pressing
button 3 and setting the time with button 6.
The symbol will disappear from the display, and
the oven will switch off.
The symbol will reappear on the display again when
cooking in the oven starts. At the end of the cooking
time the oven will switch off, the
from the display, the AUTO symbol will flash and the
buzzer will sound and continue for 7 minutes or until
button 4 is pressed once. If cooking is complete, return
the main oven thermostat to the off position.
G93

OVEN TIMER OPERATION

symbols will appear on the
symbols will
symbol will disappear
Manual operation
Manual operation is possible only when the automatic
programming has finished or after having cancelled it
by pressing push button 4. The AUTO symbol disappears
from the display and the symbol
display.
Buzzer
The buzzer goes off at the end of a programme or at the
end of the minute minder function and lasts for 7
minutes. If you wish to stop it before press button 4.
There are three different buzzer tones: to select the one
you want, press push button 2 when the time of day is
displayed.
Correcting/canceling the programme set
There will be an automatic programming error if the
time shown on the clock is between the cooking start
time and the cooking end time. This error will be
signalled immediately by the sound of the buzzer and
the AUTO symbol flashing on the display. A programming
error can be corrected by changing the duration or end
of the cooking time. Any programme that has been set
can be corrected or adjusted at any time by pressing
the corresponding programming button and then button
5 or 6. To cancel a programme, correct the time set to
show "0.00" on the display. If the cooking time is
cancelled the end of cooking time is also cancelled and
vice versa. The oven turns off automatically and the
AUTO symbol flashes on the display.
Press button 4 to set the programmer to manual
operation.
The correct time of day cannot be corrected when the
automatic operation programme is working.
11
appears on the